Related Courses

• Engine and Chassis Repair 2 Undergraduate | 4 Credits

  CATALOG #31461302

  You will diagnose, troubleshoot, tune-up, and overhaul engines and service chassis on handheld, industrial and compact equipment and tractors. Practical hands-on experience is gained in engine disassembly, measuring parts for wear, cylinder reconditioning, valve train servicing, governor adjusting, fuel and ignition system servicing, and reassembly techniques. You will service drive and chassis systems to ensure the operation of the complete unit. You will also order repair parts, prepare service report forms, and learn customer relations. COREQUISITES: 31461301 Engine and Chassis Repair 1 and 31461335 Gas and Diesel Engine Theory.

  New Richmond, Superior

  Fall 2025, Spring 2025

• Introduction to 12-Volt Electrical Theory Undergraduate | 1 Credit

  CATALOG #31461310

  This course is designed for the learner to understand basic 12-volt electrical circuits, wiring diagrams, starting, charging, and lighting systems. Classroom trainers will be used to apply electrical theory. Using hands-on activities, this course will help the learner to better understand basic 12-volt electrical systems.

  New Richmond, Superior

  Fall 2025, Spring 2025

• Gas & Diesel Engine Theory Undergraduate | 2 Credits

  CATALOG #31461335

  This course provides the theory necessary to understand and perform the hands-on tasks of troubleshooting and repairing engines, their drive mechanisms, and their chassis. Theory is presented on the principles of operation and service of 4-stroke, 2-stroke, and small diesel engines in the outdoor power equipment and compact equipment areas. Drive and chassis operation is explained to enable the student to service the complete unit. COREQUISITE: 31461302 Engine and Chassis Repair 2.

  New Richmond, Superior

  Fall 2025, Spring 2025

• Engine and Chassis Repair 1 Undergraduate | 5 Credits

  CATALOG #31461301

  You will diagnose, troubleshoot, tune up, and overhaul engines and service chassis on lawn and garden equipment and industrial equipment. Practical hands-on experience is gained in engine disassembly, measuring parts for wear, cylinder reconditioning, valve train servicing, governor adjusting, fuel and ignition system servicing, and reassembly techniques. You will service drive and chassis systems to ensure the operation of the complete unit. You will also order repair parts, prepare service report forms, and learn customer relations. COREQUISITES: 31461302 Engine and Chassis Repair 2 and 31461335 Gas and Diesel Engine and Theory.

  New Richmond, Superior

  Fall 2025, Spring 2025

• Outboard Motors Undergraduate | 5 Credits

  CATALOG #31461314

  This course provides an introduction to the marine industry. Students will learn how to work safely in a shop environment and use service tools and information. Students will learn the theory of how two-and four-stroke outboard motors operate. This course will teach students how to repair, maintain, and rebuild two-stroke and four-stroke outboard motors. Also, students will learn about fuel, ignition, manual and electric starting systems, and charging systems. Small gearcase operation and repair are also covered.

  Ashland

  Fall 2025, Spring 2025

• Marine Electricity/Electronics Undergraduate | 2 Credits

  CATALOG #31461315

  This course is designed to teach the theory of DC electricity. Students will learn how to read electrical schematics and build and repair electrical circuits found in typical boats. The student will be able to diagnose, troubleshoot, and correctly use test equipment to repair boat and engine electrical problems. Emphasis is placed on safety, tools, proper use of test equipment, specifications, and schematics. Practical applications will include real world shop experiences that will reinforce learned electrical concepts. COREQUISITE: 31461314 Outboard Motors.

  Ashland

  Fall 2025, Spring 2025

• Inboard Engines Undergraduate | 5 Credits

  CATALOG #31461322

  This course will teach students the theory of how a four-stroke marine engine operates. Students will gain the skills needed to rebuild inboard four-stroke marine engines. Students will also learn the fundamentals of inboard fuel, ignition, starting, and charging systems.COREQUISITE: 31461314 Outboard Motors.

  Ashland

  Fall 2025, Spring 2025

• Marine Diesel Undergraduate | 1 Credit

  CATALOG #31461325

  This course provides a basic working knowledge of marine diesel engines and their systems. Marine diesel theory, fuel and air delivery, and lubrication and cooling systems will be covered. Bleeding of fuel systems, adjustment of valve trains and injector pumps, and other maintenance issues will also be studied. COREQUISITE: 31461314 Outboard Motors

  Ashland

  Fall 2025, Spring 2025

• Inboard Transmission Systems Undergraduate | 2 Credits

  CATALOG #31461323

  Inboard straight shaft transmissions are covered in this course. Velvet Drive transmissions will be the main training project. Hurth and Paragon transmissions will be covered to a lesser degree. Related components such as engine alignment, shafts, couplers, stuffing boxes, struts, strut bearing replacement, etc., will be examined also. PREREQUISITE: 31461314 Outboard Motors.

  Ashland

  Fall 2025

• Outboard Gear Cases/Rigging Undergraduate | 5 Credits

  CATALOG #31461318

  Outboard motor gearcases, hydraulic trim and tilt, and steering systems are covered in this course. Students will learn how to diagnose failures, rebuild, and shim a variety of gearcases. Different types and brands of steering systems are covered. Students will learn how to repair, install, and replace steering systems. Trim and tilt units will be tested and repaired. This will give students a good working knowledge of hydraulics and troubleshooting procedures for various brands of trim and tilt systems. Installation of outboard motors on boat transoms and mechanical, fuel, oil, and electrical connections will be covered. PREREQUISITE: 31461314 Outboard Motors.

  Ashland

  Fall 2025

• Sterndrive Systems Undergraduate | 5 Credits

  CATALOG #31461319

  Sterndrive transmissions, sterndrive transom plates, sterndrive trim and tilt, and power steering are covered in this course. Students will learn how to diagnose failures, rebuild, and shim a variety of gearcases. Different types of transom plates will be covered and will include shift, bellows, gimble ring, and bell housing repairs. Hydraulic lift systems will be studied and the student will learn how to repair and diagnose failures of cylinders, pumps, motors, and electrical systems related to trim systems. Marine power steering systems include the study of control valves, power steering pumps, and boat steering systems. PREREQUISITE: 31461314 Outboard Motors.

  Ashland

  Fall 2025

• Air Conditioning Fundamentals Undergraduate | 2 Credits

  CATALOG #32601300

  Topics covered include air conditioning principles and terms, physical principles of air movement and humidity, methods of conditioning air for comfort and health, the proper use of psychrometers, dry bulb thermometers, hygrometers, pitot tubes, recorders, manometers and barometers, and the reading and interpretation of psychrometric charts and scales. PREREQUISITE: Admission to HVAC/R Plan, Refrigeration Essentials Plan, or HVAC Installation Technician Plan

  Superior

  Fall 2025

• Basic Mechanical Fundamentals Undergraduate | 3 Credits

  CATALOG #32601301

  This course is designed to introduce the learner to the basic fundamental skills necessary to work in the HVAC/R Industry. Instruction will be given in learning the various types of piping and tubing used in air conditioning, heating, and refrigeration; types of fittings, bending, brazing, soft soldering tubing, black iron pipe work, using hand tools, and the recognition and practice of safety procedures while working on heating, air conditioning, and refrigeration systems. PREREQUISITE: Admission to HVAC/R Plan, Refrigeration Essentials Plan, or HVAC Installation Technician Plan.

  Superior

  Fall 2025

• Principles of AC/DC Undergraduate | 3 Credits

  CATALOG #32601303

  This course provides an introduction to DC and AC electricity. The students will be able to perform basic resistance, current, voltage, and power calculations and measurements in both DC and AC circuits. Knowledge and use of test equipment will focus on multimeters and oscilloscopes. Critical-thinking skills are emphasized to develop competencies in problem solving and troubleshooting. This is a lab- and lecture-based course that provides hands-on and theoretical learning. COREQUISITE: 32804303 Applied Technical Math 1.

  Superior

  Fall 2025

• Heating Systems Undergraduate | 2 Credits

  CATALOG #32601304

  Topics include introduction to heat principles, temperature measurement, fuels and other sources of heat, combustion, basic heating systems, basic furnace design, gas furnace design and operation, venting of furnaces, chimney or exhaust gases, and system controls. PREREQUISITE: Admission to HVAC/R Plan or HVAC Installation Technician Plan.

  Superior

  Spring 2025

• Electrical Controls and Systems Undergraduate | 3 Credits

  CATALOG #32601305

  Topics in this course include basic electricity review, control circuits, symbols, diagrams, protection devices, transformers, relays, thermostats, single-phase motors, capacitors, control components, and troubleshooting ACR system wiring diagrams. Electrical experience equivalent to 32601303 Principles of AC/DC is recommended.

  Superior

  Spring 2025

• HVAC/R Print Reading Undergraduate | 2 Credits

  CATALOG #32601306

  Topics include print reading; understanding, interpreting, and utilizing architectural working drawings; safety procedures; drafting techniques; and lettering. PREREQUISITE: Admission to HVAC/R Plan or HVAC Installation Technician Plan.

  Superior

  Spring 2025

• Heating System Applications Undergraduate | 3 Credits

  CATALOG #32601307

  Topics include installation, start-up, and service of gas- and oil-fired heating equipment; air conditioning and air-to-air heat pump systems; and electrical and mechanical testing/analyzing of system components. PREREQUISITES: 32601301 Basic Mechanical Fundamentals and 32601304 Heating Systems.

  Superior

  Fall 2025

• Sheet Metal Fabrication Undergraduate | 2 Credits

  CATALOG #32601310

  The layout and fabrication of a variety of sheet metal fittings. PREREQUISITE: 32601301 Basic Mechanical Fundamentals.

  Superior

  Spring 2025

• Hydronic Heating Undergraduate | 3 Credits

  CATALOG #32601311

  Topics include heating ignition systems, oil boiler installation and start up, venting of gas-fired boilers, heating with hot water, multiple boiler systems basics, and zoning hydronic heating systems. PREREQUISITES: 32601301 Basic Mechanical Fundamentals and 32601304 Heating Systems.

  Superior

  Spring 2025

• Refrigeration Applications Undergraduate | 3 Credits

  CATALOG #32601312

  Topics include domestic and commercial refrigeration systems, applications, installation, servicing, troubleshooting, heat loads and piping, controls, and special refrigeration components. PREREQUISITES: 32601300 Air Conditioning Fundamentals, 32601301 Basic Mechanical Fundamentals, and 32601317 Refrigeration Fundamentals.

  Superior

  Spring 2025

• HVAC/R Electronic Troubleshooting/Repair (WBL) Undergraduate | 2 Credits

  CATALOG #32601313

  This course is designed for the advanced student who has already completed the theoretical and basic hands-on classes. In this class the student will be responsible for troubleshooting and repairing a variety of HVAC/R equipment. The student will be required to diagnose the faulty equipment, select the proper replacement parts, return the equipment to a working condition, and prepare a detailed work order listing all work performed. PREREQUISITE: 32601309 Control Circuit Applications.

  Superior

  Spring 2025

• Heat Load Estimation Undergraduate | 1 Credit

  CATALOG #32601314

  This course will teach the student how to use "Manual J" from ACCA. The student will develop the skills to do residential heating and cooling heat loads. Students will calculate heat loss and also losses or gains due to infiltration, sun loads etc. The student will do calculations on actual buildings using ACCA industry standard form J-1. The student will also be pricing energy upgrades such as insulation, window improvements, etc. and calculating payback and fuel savings. PREREQUISITE: Admission to HVAC/R Plan.

  Superior

  Spring 2025

• Geothermal Systems Undergraduate | 2 Credits

  CATALOG #32601315

  This course is designed to introduce the student to the basic concepts of geothermal heating and cooling. Students will be introduced to the concepts of geothermal heating and cooling using geothermal pumps, ground source heat exchangers, indoor heat exchangers, connecting devices, and circulating fluid configurations and fusions. PREREQUISITES: 32601301 Basic Mechanical Fundamentals, 32601317 Refrigeration Fundamentals, and 32601305 Electrical Controls and Systems.

  Superior

  Spring 2025

• Electronic Energy Management Undergraduate | 3 Credits

  CATALOG #32601308

  This course serves as an introduction to how a heating, venting, and air conditioning control system is used to operate a building's mechanical equipment so as to maintain the desired environmental conditions. PREREQUISITE: 32601309 Control Circuit Applications.

  Superior

  Spring 2025

• Outboard Motor Servicing Continuing Education

  CATALOG #47461411

  Learn how to maintain and repair your outboard motor. Students will receive personalized attention related to the repair of their outboard motor. Also, inboard and sterndrive powered boats may also be worked on, but instructor approval is required. Bring your outboard motor to the first night of class. Student should furnish basic hand tools and safety glasses.

  Ashland

  Spring 2025

• Advanced Marine Engine Rebuilding Undergraduate | 3 Credits

  CATALOG #31461344

  This course is designed to study in detail the process of rebuilding a marine engine or its related major components. The student will choose and provide a major project(s) and rebuild it to the manufacturer's specifications. The student will have to provide the instructor with a list of project(s) and the time estimated for their completion. The instructor will need to approve the project(s) and will guide the student as to the feasibility of completion. The estimated hours of completion will equal 3 credit hours (96 hours of time). The instructor will offer guidance to assure the students success in completion of the project. Lab work will need to be completed during the open time of the marine lab. PREREQUISITE: Successful completion of the Marine Repair Technician program.

  Ashland

  Fall 2025, Spring 2025

• Advanced Marine Engine Systems Undergraduate | 3 Credits

  CATALOG #31461345

  This course is designed to increase the student’s knowledge of specific manufacturers' operation systems. The student will be able to complete additional manufacture training programs. There may be an additional cost to the student for some of these programs. Also the student will select areas of interest to study in detail, and provide training to program students and the public. Student to submit an outline of work to be completed that equals the number of credit hours of the course. Lab work will need to be completed during the open time of the marine lab. PREREQUISITE: Successful completion of the Marine Repair Technician program.

  Ashland

  Fall 2025, Spring 2025

• DC Automotive Electrical Undergraduate | 2 Credits

  CATALOG #32404376

  This course will introduce students to Ohm's law, electrical fundamentals, magnetism, and series and parallel circuits. Further studies will include automobile wiring diagrams, electrical test equipment, and basic troubleshooting. COREQUISITE: 32404351 Automotive Fundamentals

  Rice Lake, Superior

  Fall 2025

• Electrical Systems Undergraduate | 3 Credits

  CATALOG #32404377

  This course introduces battery, starting, and charging systems; theory of operation; diagnostic techniques; and servicing procedures. This course also includes exterior lighting systems; diagnostics and repair procedures. Wiring diagrams will be used and emphasized throughout the course. COREQUISITE: 32404351 Automotive Fundamentals and 32404376 DC Automotive Electrical

  Rice Lake, Superior

  Fall 2025

• Suspension and Alignment Undergraduate | 3 Credits

  CATALOG #32404379

  This course introduces steering system types, suspension geometry, troubleshooting procedures, and repair of suspensions including both two- and four-wheel alignments. PREREQUISITE: 32404351 Automotive Fundamentals and 32404376 DC Automotive Electrical

  Rice Lake, Superior

  Spring 2025

• Automotive Brake Systems Undergraduate | 3 Credits

  CATALOG #32404380

  This course introduces students to automotive braking systems, troubleshooting procedures, and repair of brake systems to include manual, power, and anti-lock types. PREREQUISITE: 32404351 Automotive Fundamentals and 32404376 DC Automotive Electrical

  Rice Lake, Superior

  Spring 2025

• Engine Performance Undergraduate | 3 Credits

  CATALOG #32404381

  This course is designed to develop the skills needed to diagnose, service, and repair powertrain control, fuel and ignition systems. Emphasis is placed on diagnostic procedures and the problem-solving techniques associated with automotive engine performance and drivability. PREREQUISITE: 32404351 Automotive Fundamentals and 32404376 DC Automotive Electrical

  Rice Lake, Superior

  Spring 2025

• Body Electrical Systems Undergraduate | 3 Credits

  CATALOG #32404382

  This course is an introduction to automotive body electrical systems. Students will learn about various body electrical components and how to diagnose and repair body electrical systems. PREREQUISITES: 32404351 Automotive Fundamentals and 32404376 DC Automotive Electrical

  Rice Lake, Superior

  Spring 2025

• Automatic Transmissions Undergraduate | 4 Credits

  CATALOG #32404383

  This course includes the principles of construction and operation of automatic transmissions and transaxles. Diagnosis and repair of front-, rear-, and four-wheel drive transmissions will be covered. PREREQUISITE: 32404351 Automotive Fundamentals.

  Rice Lake

  Fall 2025

• Air Conditioning and Heating Systems Undergraduate | 3 Credits

  CATALOG #32404385

  This course introduces automotive air conditioning and heating systems. Theory of operation, diagnostic techniques, and servicing of heating and air conditioning systems will be covered. PREREQUISITES: 32404351 Automotive Fundamentals and 32404376 DC Automotive Electrical.

  Rice Lake, Superior

  Fall 2025, Spring 2025

• Advanced Engine Repair Undergraduate | 4 Credits

  CATALOG #32404387

  Focuses on developing the skills needed to diagnose, service, and repair internal combustion engines. Emphasis is placed on out-of-vehicle engine repair including overhaul procedures. Variable valve timing and cylinder deactivation systems will be included in this course. PREREQUISITE: 32404352 Engine Repair

  Rice Lake

  Spring 2025

• Intro to Diesels and Hybrids Undergraduate | 2 Credits

  CATALOG #32404388

  This course introduces students to the service of the diesel fuel systems used in pickup trucks and automobiles. It will explore the history of hybrid-electric and electric vehicles, safety concerns, maintenance, equipment and troubleshooting procedures related to these vehicles. This course will also explore some of the current and future alternative fueled vehicle configurations. COREQUISITES: 32404376 DC Automotive Electrical and 32404377 Electrical Systems

  Rice Lake

  Fall 2025

• Marine Welding Undergraduate | 1 Credit

  CATALOG #31461330

  Marine Welding is intended to provide the technician with a sound basic background in the marine welding field. Upon completion, the student will be able to select the proper materials for repairing or fabricating welding projects, choose the correct welding method for a specific application, and complete a welding project safely. Tig welding for repair of aluminum fabrication items; MIG, ARC, and OXY acetylene principles are covered in this course. COREQUISITE: 31461314 Outboard Motors.

  Ashland

  Fall 2025, Spring 2025

• Diesel Safety and Industry Practices Undergraduate | 2 Credits

  CATALOG #32412301

  This course will introduce students to the safety and legal requirements and common shop practices of the diesel and heavy equipment industry. Personal safety as well as overall shop/job site safety will be emphasized while students learn to operate shop equipment and learn basic repair techniques common to all aspects of the diesel and heavy equipment industry. Skills learned in this course will be directly applied throughout the diesel and heavy equipment technician program.

  New Richmond

  Fall 2025

• Refrigeration Fundamentals Undergraduate | 3 Credits

  CATALOG #32601317

  Topics include refrigeration principles and terms, thermodynamic processes, refrigerants, vapor compression cycles, mechanical refrigeration system components, use of electrical controls, refrigeration applications, and refrigeration tools and materials. PREREQUISITE: Admission to HVAC/R Plan, Refrigeration Essentials Plan, or HVAC Installation Technician Plan

  Superior

  Fall 2025

• Building Automation Systems Undergraduate | 2 Credits

  CATALOG #32601316

  A building automation system, or BAS, is an umbrella energy management system that oversees HVAC control systems, heating, and other energy management systems in the building. A BAS itself can combine existing mechanical and electrical systems with microprocessors, and computers. Today's buildings require smarter and better technology and it is up to specially trained technicians to manage them efficiently. Students will gain a working knowledge of computers, networks as well as electrical control systems. PREREQUISITE: 32601305 Electrical Controls and Systems

  Superior

  Fall 2025

• Diesel Truck Brake Systems Undergraduate | 3 Credits

  CATALOG #32412302

  This course is a practical study in performing diagnosis and repair of heavy truck braking systems. PEREQUISITE: 32412301 Diesel Safety and Industry Practices and 32070361 Diesel Engine Repair

  New Richmond

  Fall 2025

• Diesel Truck Chassis Systems Undergraduate | 3 Credits

  CATALOG #32412303

  This course is a practical study in performing diagnosis and repair of heavy truck chassis systems and components. PREREQUISITE: 32412304 Diesel Truck Powertrains

  New Richmond

  Spring 2025

• Diesel Truck Powertrains Undergraduate | 3 Credits

  CATALOG #32412304

  This course is a practical study in performing diagnosis and repair of heavy truck transmissions, differentials, and drivelines. PREREQUISITE: 32412301 Diesel Safety and Industry Practices and 32070361 Diesel Engine Repair

  New Richmond

  Fall 2025

• Alternative Fuels Undergraduate | 1 Credit

  CATALOG #32412306

  A practical study of the theories and procedures for the operation and preventive maintenance of non-traditional fuels and systems. PREREQUISITE: 32070361 Diesel Engine Repair

  New Richmond

  Fall 2025

• Diesel Truck Inspection Undergraduate | 2 Credits

  CATALOG #32412307

  This course is a practical study of performing Federal Department of Transportation (DOT) inspections and Federal Motor Carrier Safety Administration (FMCSA) guidelines on diesel trucks and equipment for highway use. Student will learn what defects to inspect. COREQUISITE: 32412310 Diesel Preventive Maintenance.

  New Richmond

  Spring 2025

• Diesel Live Repair Undergraduate | 3 Credits

  CATALOG #32412308

  This course is designed to familiarize the student with the procedures involved in the repair of on highway equipment. Hands-on experiences will be gained through the repair of medium and heavy duty diesel trucks. The type of equipment may vary to meet the needs of the students and program. PREREQUISITE: 32070371 Introduction to Live Repair

  New Richmond

  Spring 2025